Hemingway Kits > Hemingway Toolroom > Tool Holding and Positioning > Rear Tool Post
Ref: HK 1070
Designed by Mr. G.H. Thomas and described in the M.E. March 1976. The virtues of parting-off from the rear of the cross-slide need hardly be mentioned. The casting (suitable for the Myford Series 7 lathes and others with around 3.5" centre height) bolts to the boring table and supports either the GHT designed steel turret with 2 different parting blades (1/16" and 3/32" wide) or the alternative "Riley" turret (pictured), which accepts one parting-off blade (3/32" wide) and one standard lathe tool (max. 1/2" square) that can be precisely indexed in seconds. Very useful for chamfering, form tool work etc. Maximum diameter that can be parted is Ø2". The kit includes casting, fasteners and springs, together with all steel required to complete either the GHT or the Riley turret. This kit has been drafted from a 3D solid model and full drawings are included. In particular, the design has been revised to allow the GHT turret to accept the modern day 1/16" wide x 5/16" deep parting blade. Further advice on parting off can be read in GHT's book list below.Related products:
Ref: HK 1071
One of George Thomas' simplest and most elegant designs, the Rear Tool Post, with its indexing turret, has become a vital addition to all Myford lathes for the past 30 years. And now, Hemingway is pleased to announce a new version, based on the work of both G H Thomas and E Riley. Suitable for lathes with up to 3 ½" between the cross slide and centre, the kit includes the main casting and all material to complete a substantial Rear Tool Post for your Boxford, South Bend, Atlas, Chester, Harrison, Myford 254, Colchester, Warco, Grizzly. plus many more. The Rear Tool Post is designed to engage with either a single T slot or a pair of tapped holes towards the rear of your cross slide. The turret is designed to accept a parting blade and an additional inverted tool up to ½" square. Picture shows the tool post armed with an inverted carbide insert holder and HSS chamfering tool. Related products:
**sRecentPrefix** Recently Viewed **sRecentImageRowPrefix** **sRecentImageItem** **sRecentImageRowSuffix** **sRecentDescRowPrefix** **sRecentDescItem** _NAME_ **sRecentDescRowSuffix** **sRecentPriceRowPrefix** **sRecentPriceItem** **sRecentPriceRowSuffix** **sRecentDeleteRowPrefix** **sRecentDeleteItem** **sRecentDeleteRowSuffix** **sRecentSuffix** **sRecentEmptyList**