| | |
 | No 404 Woodruff Cutter Ref: SP 1030
Although designed to cut Woodruff keyways, the profile of the 404 cutter will also generate a T-slot suitable for our Multi-Position Saddle Stop, HK 1840.
Cutters have unthreaded Ø1/2" parallel shanks.
Price: £9.60 |
|
|
No 505 Woodruff Cutter/Myford T Slot Cutter Ref: SP 1000
Although designed to cut Woodruff keyways, the profile of the 505 cutter will also generate a T-slot to accept standard Myford T nuts.
Each of our Rotary Tables and Angle Plates can be cut with T slots to accept your existing Myford accessories. A great time saver. Cutters have unthreaded Ø1/2" parallel shanks.
Price: £9.60 | |
|
|
| | 60 Degree x 1" Dovetail Cutter Ref: SP 1001
Price: £25.55 |
|
|
1/4" x 40 tpi BSW Tap and Die Ref: SP 1003
UK Manufactured second cut (taper) HSS tap and split die (2 items). These tools cut British Standard Whitworth form threads (55°) - commonly know as "ME Series".
Price: £8.40 | |
|
|
 | Bond-a-Band Belting Ref: SP 1010/1
Bond-a-Band is a polyurethane product having a high resistance to oils and chemicals generally. It affords a good grip, excellent wearing properties, low static pick up and maintains its flexibility at low temperatures. We include this belting in our Sensitive Drill kit and imagine that many other uses can be found in an experimental workshop.
The belt is joined by welding. Cut off the belt to length, less 6% (e.g. if the belt run is 10" then cut 9.4"). Warm a thin, clean metal strip and touch the ends of the belt onto this (i.e. each end of the belt on either side of the metal strip). The correct temperature is 200 deg C. At this temperature the belt will soften to a 'tacky' consistency. Quickly push the two ends of the belt together and hold for a few moments until set. Too high a temperature will cause the belt to go into a liquid state, which will not produce a sound joint. Any flash around the joint should be trimmed away with a sharp knife. The joint will increase in strength over five days. We stock 5mm and 7 mm belting.
|
Diameter & Length
|
|
HSS Parting Blade - 3/32" Wide x 1/2" Deep Ref: SP 1013
Over 4" long so it can be nicked on the grinder and snapped in half to provide 2 blades for a Rear Tool Post.
Price: £10.20 | |
|
|
| | HSS Parting Blade - 1/16" Wide x 5/16" Deep Ref: SP 1014
As specified for the recently redesigned GHT Rear Tool Post Turret. The original 1/16" Wide x 1/2" Wide blades are now uneconomically rare.
Price: £8.50 |
|
|
7/16" x 32 tpi BSW Tap Ref: SP 1015
UK manufactured second cut (taper) HSS tap. The tap cuts British Standard Whitworth form threads (55°) - commonly know as "ME Series"
Price: £5.70 | |
|
|
| | 5/16 BSW Tap - Left Hand Thread Ref: SP 1016
UK manufactured second cut (taper) HSS tap - BSW form thread (55°).
Price: £9.70 |
|
|
5/32" x 40tpi BSW Tap and Die Ref: SP 1026
UK Manufactured second cut (taper) HSS tap and split die (2 items). These tools cut British Standard Whitworth form threads (55°) - commonly know as "ME Series".
Price: £8.40 | |
|
|
| | Taper Cup Grinding Wheel Ref: SP 1012
60-grit, Aluminium Oxide, Taper Cup Wheel, as supplied with our Worden Mk3 Tool & Cutter Grinder. The wheel has an outside diameter of Ø4", a bore of 1 1/4" and a width of 1 1/2". The wheel is safe to a working speed of 5,700 prm.
Price: £25.30 |
|
